Engine Stall

Revision as of 14:49, 25 April 2019 by YotamHarris (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

  • use the [SELECTOR] to select the number of lit lights
  • use the [<-] and [->] to shift the lights to the left and to the right
  • identify the correct sequence according to the [COLOR] of the bar
  • if the bar color is Yellow and the bar below 50% full
    • Press [IN] when the lights are set to: [Green-circle.pngBlack-circle.pngBlack-circle.pngBlack-circle.pngBlack-circle.pngGreen-circle.png]
  • if the bar color is Yellow and the bar is above 50% full
    • Press [IN] when the lights are set to: [Green-circle.pngBlack-circle.pngBlack-circle.pngBlack-circle.pngGreen-circle.pngGreen-circle.png]
  • if the bar color is Purple and the bar is below 50% full
    • Press [IN] when the lights are set to: [Black-circle.pngGreen-circle.pngGreen-circle.pngGreen-circle.pngGreen-circle.pngGreen-circle.png]
  • if the bar color is Purple and the bar is above 50% full
    • Press [IN] when the lights are set to: [Green-circle.pngGreen-circle.pngBlack-circle.pngBlack-circle.pngBlack-circle.pngGreen-circle.png]
  • if the bar color is Blue and the bar is below 50% full
    • Press [IN] when the lights are set to: [Black-circle.pngGreen-circle.pngGreen-circle.pngGreen-circle.pngGreen-circle.pngBlack-circle.png]
  • if the bar color is Blue and the bar is above 50% full
    • Press [IN] when the lights are set to: [Green-circle.pngGreen-circle.pngGreen-circle.pngGreen-circle.pngGreen-circle.pngGreen-circle.png]
  • If the bar color is Green
    • press the engine button according to the engine that had stalled